Follow Us:
MADNESS Autoworks
Los Angeles, CA
2716 Dawson Ave.
Signal Hill, CA 90755
562-981-6800
Austin, TX
22108 State HW 71 W
Spicewood, TX 78669
512-982-9393
888-993-7552 (US Toll Free)

MINI Cooper Blow-off Valve Adapter (N14 Engine) by Forge (R55 / R56 / R57 S Model)

MINI Cooper Blow-off Valve Adapter (N14 Engine) by Forge (R55 / R56 / R57 S Model)
Product Information
Price: $94.99
Manufacturer: MINI
Average Rating: Not Rated
LOWEST PRICE GUARANTEED!* Read More!

Please select your desired amount and confirm your addition to your cart.
Qty: Confirm Add to Cart
Fits Models
Please make sure the product fits your car model.
Need Assistance?
WE'RE HERE TO HELP!

Call us at (888) 993-7552
and get assistance from one of our sales team members!

Product ID Number: 849
Shopping Cart
Your cart is empty.

Browse through our many listings
and purchase something today!
Shipping Estimate

Buying Internationally?

ORDERING 3 OR MORE ITEMS?

Call us for a shipping discount!
Phone: (562) 981-6700
Country:
Region / State:
Post Code:

The FMDVMCS is a sandwich type adaptor that fits between the existing electrical solenoid and the turbo charger housing on the MINI Cooper S N14 engines.

On these engines, built into the turbocharger housing, is a bypass facility. This allows charge air to be recirculated around the turbo charger from the boost side back to the intake side. This recirculation path is opened and closed by means of an electrical connection from the engine management, to a solenoid that is mounted on the turbocharger housing. As you accelerate, the turbo charger vanes are spinning and boost pressure is increased, literally blowing into the engine cylinders. Then when you change gear, you take you foot off the accelerator momentarily, select the next gear, and accelerate again. As you take your foot off the accelerator the throttle valve to the engine closes. The problem here is that during this process the turbo is still spinning and the boost pressure that it is producing has no where to go. (This is a bit like putting you hand over a hair dryer so the air cannot get out) What happens at this point is the turbo starts to stall, the spinning vanes slow down (incurring a lot of stress) and the boost pressure drops. When you open the throttle valve again by pushing down on the accelerator (demanding more power) the turbo has lost its momentum, boost pressure and there is a pause or a "Lag" before the engine is producing the required power once again.

To combat this loss of power and stress on the turbo, a recirculation or diverter valve is used. On the Mini, when the throttle valve closes, the engine management opens the recirculation route around the turbo. This gives the charge air an alternative route and allows the turbocharger to keep spinning so that when you accelerate again there is no "lag" or waiting period. This system works well and is adopted by nearly all vehicle manufacturers on turbo charged petrol engine applications. The only downside to this system is that a turbo chargers produce heat. (The hot air that leaves a turbo is cooled by passing it through an intercooler before it enters the engine. The cooler the air the more power is produced). By recirculating the hot air back into the intake side of a turbo the temperatures increase. This is where the Blow Off or Dump valve plays its part. By expelling the charge air to atmosphere rather than recirculating it, you do not increase the intake air temperature but you do allow the turbo to keep spinning. The side effect which is unacceptable to most vehicle manufacturers is the noise of the valve expelling the air.

By fitting the FMDVMCS between the existing solenoid and the turbo housing (this involves removing only 3 bolts) the air is re-directed to atmosphere rather than recirculated. It should be noted that the engine management also uses this valve to decrease engine power when necessary. An example of this is by the (DSC) Dynamic Stability Control system. Although you would not normally hear this occurring, when a blow off adaptor is fitted you may well hear the air being expelled when the DSC operates (going too fast around a bend for example).

Special note:  This will only fit models with N14 engines, please see the list below.

Fits:

  • MINI Cooper S Clubman R55 (2008-2010)
  • MINI Cooper JCW Clubman R55 (2009-2012)
  • MINI Cooper S R56 Hatchback (2007-2010)
  • MINI Cooper JCW R56 Hatchback (2009-2012)
  • MINI Cooper S R57 Convertible (2009-2010)
  • MINI Cooper JCW R57 Convertible (2009-2012)
Write Review
Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below: